Page 1 of 1
		
			
				Powder Mountain Access
				
Posted: 
Mon Jul 10, 2006 9:03 am 
				by Augie
				I spoke to the management at Powder Mountain about kite access. They say they have worked out the concerns that the insurance company had with kiting and the insurance company now is OK with kiting at Pow Mow. They still want to charge for access, but can't figure the best way to go about it.
I also asked about when/if they would cut the trees in the gap between the parking lot and the riding area. I had marked a small aspen grove and a few other oddball trees that were in the way on the last day of the season. Well, due to Pow Mow replacing a lift this summer they don't have anyone available to cut them down. However, I was given permission to cut them myself whenever I get to it. The trees only have to be cut and trimmed to lay flat and left in place. I have the gate combination and can drive directly to the spot. I also have a chain saw. Does anyone else want to help? If so, when is the best time?
			 
			
		
			
				
				
Posted: 
Mon Jul 10, 2006 9:11 am 
				by rizzle
				I would love to help, Ive got a chain saw to. let me know when.
Ryan Allen.
			 
			
		
			
				
				
Posted: 
Mon Jul 10, 2006 10:27 am 
				by Jacob Buzianis
				count me in.  you have my number augie. Jacob Buzianis
			 
			
		
			
				
				
Posted: 
Mon Jul 10, 2006 11:03 am 
				by Marty Lowe
				I have a small chain saw, 
and would love to get rid of those suckers!!
Count me in..
Unless it's windy,
or the end of July.
(Gorge trip)
Let's set a tenitave date.
Sat. Aug 12
with 
Sat. Aug 19
as wind delay date.
-Marty 

 
			 
			
		
			
				
				
Posted: 
Mon Jul 10, 2006 12:49 pm 
				by Augie
				That sounds good. I didn't want to set a date that might conflict with someones plans, so I was waiting to see who chimed in. So with Marty's plans in mind lets go with Sat Aug 12 @ 10:00 at the Hidden Lake parking lot. You may not get past the gate to the parking lot and in that case I will open it. Sat 19 Aug is the alternate date. With 3 saws it won't take long to beat up an aspen grove.
I almost hate to say it but I still haven't gotten out on the water. I  haven't had my kites out since the snow melted and I acquired a new squirt boat (ultra-low volume kayak).
			 
			
		
			
				
				
Posted: 
Tue Jul 18, 2006 1:57 pm 
				by lesvierra
				Count me in Auggie!  See you there.
			 
			
		
			
				
				
Posted: 
Tue Aug 01, 2006 11:31 am 
				by Marty Lowe
				Augie,
 I'm sorry but my plans have changed.
I'll be back in the Gorge both weekends.
If you need my chain saw, I can get it to you to use.
 I'm not sure, but I think Jake is in Maui,
and won't be there.
-Marty 

 
			 
			
		
			
				
				
Posted: 
Tue Aug 01, 2006 9:59 pm 
				by lesvierra
				Hey Auggie, what do you say we head to the gorge.  the trees can wait for two more weeks.
			 
			
		
			
				
				
Posted: 
Wed Aug 02, 2006 9:08 am 
				by windzup
				I can cut trees either this weekend or the one after the 12th. But next week is no good for me.....or half the others it sounds like.
Whats the word Augie, is the 12th a go or can we reschedule?   
I've got a chainsaw tuned up, stickered up, and ready to mow down a Snowkiting paradise!!   
Windzup,
Brian Schenck
			 
			
		
			
				
				
Posted: 
Wed Aug 02, 2006 1:52 pm 
				by Augie
				I don't mind working alone but it would go faster if we had more hands. Lets just plan on 19-20 August @ 10:00. Meet at the hidden lake parking lot. If the chain is across the road I will open it.
			 
			
		
			
				
				
Posted: 
Thu Aug 03, 2006 9:21 am 
				by rizzle
				Augie,
Dont forget about me. I have 2 chainsaws we can use. im in or the 19-20.
ryan 801-201-4005
Marty, 
Did you guys head to the coast while you were in OR.
			 
			
		
			
				
				
Posted: 
Thu Aug 03, 2006 9:51 am 
				by lesvierra
				I'm still in.. pesky aspens.. Grrrrr....
			 
			
		
			
				
				
Posted: 
Thu Aug 03, 2006 10:06 am 
				by Marty Lowe
				rizzle wrote:Marty, 
Did you guys head to the coast while you were in OR.
Ryan,
 Off topic,
so I started a new thread...
-Marty 
